Jumat, 09 Desember 2011

BOOKENDS EXCLUSIVE WOODCRAFTS

You can easily make woodcraft for your naughty to hold those books that you would always like to render before going to bed. Bookends really serve great when it comes to decoration further handling your favorite books.

To make the bookend you require a polyester brush, ruler, pencil, scissors, cloth, scroll or band saw. Also one piece 4'*6'*1' of wood , nine 1 1/2 want finishing nails, 2 pieces of 1/4' cork, wood glue, wood filler, clear urethane varnish, one shot piece of coarse sandpaper, also fine sandpaper.

stairs to make its bookend:

1. First you need to print ice the base, back again the center deb patterns and cut it out.

2. Then trace the base configuration measuring 5'*5' onto its wood twice and cut its bits out with the scroll or band saw.

3. Trace the back pattern measuring 8 1/2 '* 5' onto the timber twice and cut the pieces out with the scroll or band saw.

4. Next characterize the center piece measuring 6' *3' heretofore and again cut the minx hole up corkscrew or band saw. Cut this baby doll into half to undertake its center pieces each measuring 3' * 3'.

5. Sand all the pieces until they become smooth first with the coarse sandpaper and then fine sandpaper.

6. Now wipe the wood with a cloth to remove the dust from sanding.

7. Glue the back to the base besides then headband off its entire excess flue with a damp cloth.

8. Allow this glue to dry.

9. Now adhesive the core to the back and the base and wipe off the excess glue with a appease cloth before irrefutable dries.

10. Allow this glue to dry.

11. Next secure the back, base and center cover the finishing nails for extra strength, 3 on its base unbefitting the cork setting the center piece attaches to the bottom, 3 up the back to hold the core piece in place and 3 along the back spot the bottom attaches to it.

12. gorge its nail holes with timber filler where they could be countersunk. let it dry and then sand it lightly with sandpaper.

13. When the glue and nail filler is thoroughly dry, polish with small polyester brush and consult the container of varnish due to proper instructions. If necessary, sand firm lightly before varnishing again. Varnish again in 24 hours.

14. Trace the base pattern twice onto the cork and adhesive the cork to the underside of the base of each bookend to prevent scratching furniture and prevent slipping.

But while you make this bookend always keep in mind that these kit are dangerous so you should always look for the safety measures.

For further information, colloquy craft-books Visit Source
THE BEST INTERIOR ARCHITEC

Tidak ada komentar:

Posting Komentar